1. Turn off hot and cold water supply valves.

2. Install mounting bracket between the lines or at a place of convenience.

3. Attach the valve assembly on the mounting bracket.

4. Disconnect the right supply line from the faucet and connect it to valve assembly.

5. Disconnect the left supply line from the faucet and connect to valve assembly.

6. Connect the provided supply line to the right nipple of faucet and valve assembly.

7. Connect the provided supply line to the left nipple of the faucet and valve assembly.

8. Connect power supply connectors to the valve assembly terminals. There is no polarity to be concerned of.

9. Plug in power supply and turn the water supply valve open. Check for leaks. Retighten the lines if needed.