AutoTap Valve Assembly Instructions

• Turn off hot and cold water supply valves.

• Install mounting bracket between the lines or at a place of convenience.

• Attach the valve assembly on the mounting bracket.

• Disconnect the right supply line from the faucet and connect it to valve assembly.

• Disconnect the left supply line from the faucet and connect to valve assembly.

• Connect the provided supply line to the right nipple of faucet and valve assembly.

• Connect the provided supply line to the left nipple of the faucet and valve assembly.

• Connect power supply connectors to the valve assembly terminals. There is no polarity to be concerned of.

• Plug in power supply and turn the water supply valve open. Check for leaks. Retighten the lines if needed.

Send to Printer

Close Window